The VAN family of axial naval anti-explosive industrial fans are used both in ship ventilation and conditioning installations, especially in places with danger of explosion, and on offshore drilling rigs. This type of fans can convey gases without impurities, chemically neutral and are designed to work permanently in saline fog conditions, at a relative air humidity of 95% (for ambient temperature of + 45ºC).
Flow Q = 250 ÷ 55000m3 / h, pressure H = 28 ÷ 80 mmCA.
The execution of the naval fans is done under the supervision and with the approval of RNR.
CERE O OFERTĂ de Ventilatoare axiale navale.
VAP 560M axial fans for agriculture (also known as VAP 560A) derives from a combination of the family of axial industrial fans with adjustable profile vanes and from naval axial industrial fans, being used especially for ventilation of agricultural silos (hence the suffix A from the name; it was later abandoned because it was considered too restrictive and modified with the suffix M, which means modernized / modified, because this type of fans can be used for ventilation and other types of storage).
Although they come from a type of antiex industrial fans, they are usually made in normal construction, but if they will work in places with danger of explosion, in areas that develop gases with potential for explosion, the fans can also be made in construction, antiex. This type of industrial fans can convey gases without impurities, generally chemically neutral, at a relative humidity of up to 95% (for ambient temperature of + 45ºC). They are built as standard in the mobile version, on wheels, so that they can be easily moved to different points of the silo.
CERE O OFERTĂ de Ventilatoare pentru agricultura.
Axial window fans VF (or VAF) are intended for aeration of work rooms, industrial halls, livestock farms. The working environment is generally dust-free atmospheric air, with a maximum humidity of 60% at an ambient temperature of + 20ºC. It is executed in normal or antiex construction.
Although they are intended to be mounted in windows, they can also be installed in the walls of rooms or industrial halls, making a direct connection with the outside where it exhausts the vitiated air inside. Depending on the mounting position, they can evacuate the air from the inside to the outside or they can introduce fresh air from the outside to the inside. Therefore, in spaces that do not have adequate ventilation possibilities or where a surplus of fresh air is needed, it is recommended to install these VF fans in pairs, so that one removes a defective air volume and the other, forced and at the same time introduces the same volume of fresh air.
CERE O OFERTĂ de Ventilatoare de fereastra.
VPV and VPA axial fans have propellers made of aluminum, with adjustable blades in motion, manually or with servomotor and are for air coolers used in refineries and the chemical industry. VT and VPV axial fans can also be made of fiberglass-reinforced polyester vanes. VTs are adjustable to stop and are used for recirculate water cooling towers.
CERE O OFERTĂ de Ventilatoare axiale speciale-VAP.
VAS standard-symbolized industrial axial fans are intended for the transport of air or gases that do not contain corrosive, abrasive or toxic agents, metal dust or suspensions with tendencies to agglomerate or stick. The content of other suspensions is of maximum 50 mg / m3. The vehicle will be non-explosive and non-flammable and will have a maximum temperature of + 40 ° C, with relative humidity 80% at + 25 ° C. They can also be made in anti-explosive construction, with a diameter of 500mm.
Flow Q = 900 ÷ 81000 m3 / h, pressure H = 9 ÷ 45 mmCA.
VAS fans can be delivered, on request, together with the following accessories: suction nozzle with protection grid, supports, extended housing.
CERE O OFERTĂ de Ventilatoare axiale standard.